Directus Prodigy One NN-SC-1001 Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільна відеосистема Directus Prodigy One NN-SC-1001. Directus Prodigy One NN-SC-1001 15 сторінок. Nissan/infiniti

Друкувати сторінку
Locate and pull back 4 mounting tabs for front faceplate. These will be identified by
small pull tabs with de-tents in them to keep the faceplate clipped on.
Note: A small pick tool can be used to free the tabs.
Once faceplate has been removed, place LCD assembly aside and locate two pieces
A
Fig
shown in
One is LCD plastic mount (black) and the other is the touch panel glass. Place black
plastic frame into original LCD frame (metal) as shown below in
B
Fig.
with the ribbon cable groove positioned at the bottom of original LCD frame
(metal).
Next, place touch panel glass into plastic frame with ribbon cable facing up as shown in
Fig.
( Note: foam gasket will be face up.)
C
Re-assemble faceplate with touch panel glass as shown in
Once assembled, remove 4 board mounting screws as shown in
(You will no longer need them)
A
Fig.
b
Fig.