Clarke CSB20B Инструкции пользователя - Страница 3

Просмотреть онлайн или скачать pdf Инструкции пользователя для Инструменты Clarke CSB20B. Clarke CSB20B 13 страниц. Shot blast cabinet
Также для Clarke CSB20B: Инструкции по эксплуатации и техническому обслуживанию (6 страниц)

INVENTORY

Remove all components from the carton and check them against the

following list.

A - Foam Vent Filter

D - Ceramic Nozzles 4, 5, 6 & 7mm (one nozzle is fitted)

F - Gun c/w air and pickup hoses

ASSEMBLY

The unit is shipped fully assembled, except for the air vent filter and the gun

with attached hoses. These should be connected as follows:

First, remove the grid and all the

various loose components from within

the cabinet.

The end of the air inlet hose,

connected to the gun, is inserted

through the 16mm dia. hole in the

cabinet from the inside, as shown in

Fig 2. Ensure a flat washer is threaded

on to the adapter as shown.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

B - Air Vent Cover

G - 12V transformer & cable

C - 9 x Spare protective film

E - PTFE tape