Clarke CSB20B Kullanıcı Talimatları - Sayfa 3
Araçlar Clarke CSB20B için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Clarke CSB20B 13 sayfaları. Shot blast cabinet
Ayrıca Clarke CSB20B için: Kullanım ve Bakım Talimatları (6 sayfalar)
Sayfayı Yazdır
INVENTORY
Remove all components from the carton and check them against the
following list.
A - Foam Vent Filter
D - Ceramic Nozzles 4, 5, 6 & 7mm (one nozzle is fitted)
F - Gun c/w air and pickup hoses
ASSEMBLY
The unit is shipped fully assembled, except for the air vent filter and the gun
with attached hoses. These should be connected as follows:
First, remove the grid and all the
various loose components from within
the cabinet.
The end of the air inlet hose,
connected to the gun, is inserted
through the 16mm dia. hole in the
cabinet from the inside, as shown in
Fig 2. Ensure a flat washer is threaded
on to the adapter as shown.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
B - Air Vent Cover
G - 12V transformer & cable
3
C - 9 x Spare protective film
E - PTFE tape