CLAS OM 8036 Краткое руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Инструменты CLAS OM 8036. CLAS OM 8036 16 страниц. 2nd generation tool bearing removal 62-85mm

Печатать страницу

OM 8036

2nd GENERATION TOOL BEARING REMOVAL Ø62-85mm

Manual operation

Manually tighten only the nut + bearing

counter-nut

, the removal ring

until it comes out completely from its seat (fig. 4).

The bell is sized such that it can fully house the hub during the removal stages (fig. 5).

Operation with 17-ton hydraulic cylinder (UPGRADE OPTION OM 8037)

When performing the operation using the 17-ton hydraulic cylinder, fit the cylinder between the bell and a second

counter-nut

(fig. 6).

Now actuate the cylinder that, by axially translating the screw, allows you to remove the integrated hub from its

seat.

Since the cylinder has a max stroke of 43 mm, if the removal was not performed completely, this operation can be

repeated several times by discharging the hydraulic cylinder (single-acting cylinder with spring return) and then

tightening the counter-nut

We recommend the use of the cylinder combined with the 700-bar manual hydraulic pump.

on the screw M20x1.5

and the integrated HBU bearing all move together (jointly) towards the bell

again against the cylinder.

. During this phase it is important that the