Armytek Prime C2 Pro Руководство пользователя
Просмотреть онлайн или скачать pdf Руководство пользователя для Фонарик Armytek Prime C2 Pro. Armytek Prime C2 Pro 2 страницы.
Также для Armytek Prime C2 Pro: Руководство пользователя (2 страниц)
Печатать страницу
The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
Care and Storage
It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
Service and Warranty
Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.
Guarantee does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: [email protected]
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Specifications are subject to change without notice.
Warnings
Prime
THE MOST TECHNICALLY ADVANCED
USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
Specifications
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan.
10 years no-hassle warranty
Superb light of amazing constant brightness due to powerful electronics and active temperature control without timers.
§
Efficient TIR-optics and no "tunnel vision" effect even after continuous use.
§
Warning Indication of low battery level and real-time temperature control (Prime C2 Pro only).
§
Side switch for comfortable one-hand operation and easy modes switching with advanced operation.
§
Multicolor State Indication and ultra low current drain in OFF-state – more than 25 years.
§
Removable magnet in the tailcap, firm holster, removable clip, strong lanyard and possibility of tail-stand for multipurpose use.
§
Compact and light-weight flashlight of guaranteed durability stands up harsh impacts and falling from 10 meters.
§
Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters.
§
Model
Prime A1 Pro
Prime A2 Pro
LED / Optics
Brightness stabilization type
Light output, LED/OTF lumens*
600 / 500
850 / 700
Peak beam intensity, candelas
3280
5080
Hotspot / spill
Beam distance*
115 meters
143 meters
Turbo2
500 lm / 0.8h
700 lm / 0.8h
Modes, light output
Turbo1
280 lm / 1.2h
280 lm / 2.8h
(OTF lumens*) and
Main3
95 lm / 4.2h
95 lm / 8.3h
runtimes
(measured with
Main2
34 lm / 11.7h
34 lm / 25h
Sanyo Eneloop AA
Main1
10 lm / 35h
10 lm / 75h
2000 mAh /
Armytek CR123A
Firefly3
—
1500 mAh /
Firefly2
2 lm / 8d
2 lm / 17d
Armytek 18650 Li-
Firefly1
0.15 lm / 90d
0.15 lm / 200d
Ion 3400 mAh until
the light output
Strobe3
1Hz/ 34lm/ 60h
1Hz/ 34lm/ 125h
drops to 10% of the
Strobe2
1Hz/ 500lm/ 6h
1Hz/ 700lm/ 4h
initial value)
Strobe1
10Hz/ 500lm/ 1.7h
10Hz/ 700lm/ 1.7h
Power sourсe
1xAA /
2xAA
1x14500 Li-Ion
Size and weight
Length 108mm,
Length 155mm,
(without batteries)
body diameter
body diameter
24.5mm, head
24.5mm, head
diameter 24.5mm,
diameter 24.5mm,
weight 66g
weight 70g
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
** It is allowed to use only protected Li-Ion batteries.
.
Prime C1 Pro
Prime C2 Pro
Cree XP-L or XM-L2 / TIR
Cree XHP35
FULL (constant light)
800 / 650
1250 / 1050
2100 / 1700
4320
7560
9200
20° / 8 0°
131 meters
174 meters
192 meters
650 lm / 0.7h
1050 lm / 1.3h
1700 lm / 1h
280 lm / 1.8h
750 lm / 1.8h
950 lm / 1.7h
95 lm / 6.2h
410 lm / 3.5h
420 lm / 4h
34 lm / 18h
190 lm / 8.5h
180 lm / 10.5h
10 lm / 55h
65 lm / 18h
35 lm / 50h
—
—
8.5 lm / 6d
6 lm / 12d
2 lm / 13d
2.5 lm / 18d
1.7 lm / 40d
0.15 lm / 140d
0.4 lm / 100d
0.15 lm / 200d
1Hz/ 34lm/ 90h
1Hz/ 190lm/ 42h
1Hz/ 180lm/ 52h
1Hz/ 650lm/ 3.3h
1Hz/ 1050lm/ 6.7h
1Hz/ 1700lm/ 5h
10Hz/ 650lm/ 1.7h
10Hz/ 1050lm/ 2.7h
10Hz/ 1700lm/ 2h
1x18350 Li-Ion /
1x18650 Li-Ion /
1x18650 Li-Ion
1xRCR123 Li-Ion /
2xCR123A /
1xСR123A
2xRCR123 Li-Ion**/
2x18350 Li-Ion**
Length 93mm,
Length 124mm, body diameter 24.5mm,
body diameter
head diameter 24.5mm, weight 68g
24.5mm, head
diameter 24.5mm,
weight 64g