Armytek Prime C2 Pro Руководство пользователя
Просмотреть онлайн или скачать pdf Руководство пользователя для Фонарик Armytek Prime C2 Pro. Armytek Prime C2 Pro 2 страницы.
Также для Armytek Prime C2 Pro: Руководство пользователя (2 страниц)
Печатать страницу
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a turned-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
Armytek Optoelectronics Inc. shall not be liable for any harm done to the user if it
was caused by improper use of the product.
Care and Storage
It is recommended to clean the threads and O-rings off dirt and old grease. Remember that secure protection from water and dust
cannot be provided by worn out sealing. And fouling as well as lack of lubricant cause fast wear-out of threads and sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the flashlight or tailcap as it
can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required, even if it is more than twice a year.
In case the tailcap rubber button is damaged, it should be replaced. In the same way you can also
replace the switch with the spring.
Replacement order:
1. Unscrew the tailcap.
2. Unscrew the first washer inside it to take out the switch. To do so you should use needle-
nose pliers (round-nose pliers or another tool: most suitable will be expansion pliers). Use
the tool as it is shown at the picture. To replace the rubber button unscrew the second
washer under the switch.
3. Replace the rubber button and assemble the parts in inverse sequence.
Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no
other parts in the flashlight that can be replaced by the user.
Service and Warranty
Armytek provides free warranty repair for 10 years from the purchase.
Warranty doesn't cover damage caused by:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: [email protected]
Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada
Specifications are subject to change without notice.
Warnings
1.
2.
Partner
THE MOST TECHNICALLY ADVANCED
FLASHLIGHTS IN THE WORLD
USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
Specifications
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs applying in them components made in the USA and Japan.
Amazing brightness and extreme beam distance in four different sizes and with various power sources
§
TIR-optics for smooth light beam and no «tunnel vision» effect even after continuous use
§
Additional side button for comfortable one-hand operation
§
Solid and impact-resistant body ensures the flashlights' efficiency even after the fallings from the height of 10 meters
§
The highest standard of water- and dustproof IP68 - submersion to the depth up to 10 meters
§
Compact size and small weight perfect for constant carrying in the bag, pocket or on the belt.
§
Compatible with original remote switches and weapon mounts
§
Multi-color warning voltage and temperature indication
§
Model
Partner A1
LED / Optics
Brightness stabilization type
Light output, LED / OTF lumens*
450 / 370
Peak beam intensity, candelas
3050
Hotspot/spill
Beam distance*
120 yards / 110 meters
Hotspot diameter at 100 meters
Firefly: 1.7 lm / 200h
Modes and runtimes (measured for
Main1: 10 lm / 25h
Sanyo Eneloop AA 2000 mAh /
Main2: 70 lm / 3h
Armytek CR123A 1500 mAh / Armytek
Main3: 210 lm / 1.2h
18650 Li-Ion 3100 mAh to the
Max: 370 lm / 30min
decrease to 10% of initial brightness)
Strobe: 15 Hz / 1h
1xAA /
Power source
1x14500 Li-Ion
Length 121mm, body
Size
diameter 24.5mm
Weight (w/o batteries)
69g
* Light outputs for flashlights with Warm light are about 7% less, beam distances are about 3% less.
** C2 Pro: in Max mode stabilization is DIGITAL, in all other modes - FULL.
We highly recommend NOT to use LOW-QUALITY CR123A batteries as a power source for often and continuous flashlight's
operation. Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.
10 years no-hassle warranty
.
Partner A2
Partner C1
Partner C2
Cree XP-L / TIR
FULL stabilization (constant brightness)**
620 / 500
500 / 400
1200 / 1050
4250
3100
8800
20°/ 80°
142 yards / 130 meters
121 yards / 111 meters
206 yards / 188 meters
35 meters
Firefly: 1.7 lm / 300h
Firefly: 1.7 lm / 300h
Firefly: 2 lm / 18d
Main1: 10 lm / 48h
Main1: 10 lm / 40h
Main1: 35 lm / 48h
Main2: 70 lm / 9.5h
Main2: 70 lm / 5h
Main2: 200 lm / 9h
Main3: 210 lm / 2.5h
Main3: 210 lm / 2h
Main3: 420 lm / 3.8h
Max: 500 lm / 1h
Max: 400 lm / 35min
Max: 1050 lm / 1.5h
Strobe: 15 Hz / 2h
Strobe: 15 Hz / 1h 10min
Strobe: 15 Hz / 3h
1x18350 Li-Ion /
1x18650 Li-Ion /
2xAA
1xR123 Li-Ion/1xСR123A
2xCR123A/2xR123 Li-Ion
Length 167mm, body
Length 105mm, body
Length 136mm, body
diameter 24.5mm
diameter 24.5mm
diameter 24.5mm
76g
71g
65g