Discount Car Stereo BLU-C5 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Приемник Discount Car Stereo BLU-C5. Discount Car Stereo BLU-C5 12 страниц. Music streaming module for seelect 1997-04 corvette
Также для Discount Car Stereo BLU-C5: Руководство по установке (9 страниц), Инструкции по установке (12 страниц), Руководство по установке (10 страниц), Руководство по установке (8 страниц), Руководство по установке (12 страниц)

10-pin connector

3. Tap installation harness red wire to 12V accessory supply in vehicle

Where to get 12V Accessory supply:

1997-03 vehicles have a 3-pin plug under passenger toe board near BCM (may

be covered in black duct tape) -- See Fig. 9

The yellow wire is ACC.

If vehicle does not have 3-pin plug; go to Alternate 12V

Acc. supply below.

Note: 3-pin plug may not be present in all vehicles and may have been

omitted from model year 2004.

Fig. 8

Fig.

Alternate 12V Acc. supply:

We recommend taping fuse #22 or #11 of interior fuse box

located under passenger seat behind toe board (See Fig. 11).

circuit seen in Fig. 10 may be use for this purpose.

The add-a-fuse

mini-tap

fuse tap circuit

How to use the Add-a-fuse circuit connection

3. Strip 1/4- 3/8" insolation from included accessory wire.

4. Look inside blue connector to see where metal ends. Useful in step d.

5. Insert stripped wire to blue connector (See Fig. 10)

6. Hold wire in place and crimp down (crimping too, plyers etc.) After

crimp, pull wire to verify crimp integrity.

7. Remove fuse #22 or #11 (if present) from vehicle fuse box otherwise

skip to step g.

8. Insert factory fuse to empty slot on add-a fuse circuit

9. Insert add-a-fuse circuit to fuse slot #22 or# 11

Noteworthy: If fuse #22 or #11 is missing from fuse box, the empty fuse slot on

add-a-fuse tap remains empty. To test, turn ignition "ON" and verify LED inside

module is flashing, otherwise check voltage at fuse slot and/or check crimp

integrity,

Fig. 10