Discount Equipment KL-14 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пила Discount Equipment KL-14. Discount Equipment KL-14 16 страниц. 14” compact saw
Также для Discount Equipment KL-14: Руководство (12 страниц)
Печатать страницу
KL14-I-1017
•
Read and understand all operating instructions before operating this equipment.
Death or serious injury can result if this machine is used improperly.
•
Concrete saws are designed to be used to cut flat horizontal concrete or asphalt
slabs using diamond saw blades.
•
The machines may be equipped with gasoline engines or electric motors.
•
They are designed to be controlled by a single operator from a position at the rear of the saw.
•
Maintain a safe distance from other personnel in the area.
Be sure to read the Rx for Concrete Saws supplied with your machine.
IMPORTANT:
Perform Pre-Start Check.
• Visually inspect the equipment for wear or damage.
• Be sure all guards are in place and functioning properly. Do not operate unless blade guard is in place
and secure.
• Perform all daily maintenance.
• Check to be sure water tubes are functioning properly if performing wet-cutting operations.
• Inspect blade - Be sure the correct blade is installed properly on the machine, including RPM, size,
mounting arrangement and its intended use.
• Check blade for damage (see Figure 1 , below).
• Inspect work area to determine the presence and location of deck inserts, pipes, columns and objects
protruding from the slab surface so that they may be avoided during the cutting operation. Scribe a
line to help guide the saw.
Segment Loss:
Usually insufficient
water
Page 6
IMPORTANT NOTES
Operating Instructions
EQUIPMENT DEVELOPMENT CO., INC.
EQUIPMENT DEVELOPMENT CO., INC.
Possible Diamond Blade Problems
Arbor Hole
Out-Of-Bound
Blade not properly tightened
or seated on arbor
800-638
800-
Cracked Segments
And or Core
Wrong Blade for job
Figure 1
Blade Will Not Cut:
Blade is glazed or
to hard for job