Aerialix ARLX-OM2400-5 Руководство по строительству - Страница 9
Просмотреть онлайн или скачать pdf Руководство по строительству для Антенна Aerialix ARLX-OM2400-5. Aerialix ARLX-OM2400-5 12 страниц. Collinear antenna kit
802.11 2.4Ghz Low-Power 5dBi Vertical Collinear Antenna
Figure 12. Radome construction materials.
In order to prevent the brass from "rattling" inside the radome, we suggest wrapping 1in/2.52cm of standard black electrical
tape to each coil as shown in Figure 13. When wrapping the coils with electrical tape, be sure to wrap it tight, as it will be
rubbing up against the interior of the radome during insertion. Loose fitting tape may cause jamming and subsequent bend of
brass elements. This should only be done if rattling is of concern.
Figure 13. Anti-rattling tape applied to the coils.
You will notice that one end of the radome has a larger inner diameter than the other end. Insert the top element of the antenna
into the milled end of the radome carefully. If you wrapped electrical tape over the coils, you may encounter resistance. If you
encounter a lot of resistance, remove the antenna and unwrap any coils that have an abundant about of tape on them. Do not
force the antenna assembly into the radome. Continue inserting the antenna assembly into the radome until the entire decoupler
and 0.50in/1.27cm of feedline, as seen in figure 14.
(C) Aerialix 2002 (9 of 13)