3Doodler Flow Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для 3D-принтеры 3Doodler Flow. 3Doodler Flow 9 страниц.

Печатать страницу

I reversed the

plastic but can't

get it out

My Pen won't

heat up (LED

light stays red)

My pen resets

every time I try

to use it.

SECTION 4: TIPS AND BEST PRACTICES

Pay attention

to filament types

and settings

11/2023

It is possible that the plastic is either too short to reverse

all the way out of your pen, or that the plastic has moved

past the pen's drive gear system.

You can check for these issues by looking through the

maintenance cover.

Plastic reversed, but is too short to take out and is no longer

in contact with the drive gear.

Plastic is beyond drive gear.

For both of these issues, you can try the

following options:

7A.

While the pen is ON and extruding, insert a

new spool of plastic or use the included tool

to push the remaining plastic through

nozzle tip.

It takes around 60-90 seconds for your pen to heat up. If, after that time,

the pen still does not heat up and the LED light remains RED, turn the

Pen OFF and back ON and try again. If that still does not work, please

Check your power source. This pen won't work with smart adapters.

(Adapters that can handle multiple wattages) including USB-C ports

on computers.

• For optimal Doodling, we suggest using the correct temperature settings for

your plastic.

• Double check which type of plastic you are using before you set your pen to

the correct temperature setting (PLA or ABS). If your plastic spools get mixed

up, here is a handy table for sorting and identifying what you're working with.

• For more detailed information on filament types, visit our FAQ:

learn.the3Doodler.com/faqs/.

PLA:

Temp:

PLA Temp

LED Light:

GREEN

Feature:

Glossy plastic sticks to fabric,

windows, metal and other hard surfaces.

How to tell:

Very rigid, no white semi-

circle ends.

SECTION 3: TROUBLESHOOTING

7B.

While using the

reverse feature,

remove the nozzle

and use the

unblocking tool to

push the plastic out

the back of the pen.

Section 3,

(See

Step

3B)

the

ABS:

Temp:

ABS Temp

LED Light:

BLUE

Feature:

Extruded plastic has a matte

finish. Great for drawing in the air.

How to tell:

Plastic has white semi-

circle ends.