3DP Workbench Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для 3D-принтеры 3DP Workbench. 3DP Workbench 12 страниц. Moving and folding the gantry

3DP Moving and Folding the Gantry

Approved By:

Date: <6/14/2016>

Page 5 of 11

Step 4: Power down and disconnect cables.

Turn off the power and disconnect the unit from the main power source.

With a narrow flat screwdriver disconnect the connectors from the back of the control box.

Disconnect the Bed thermistor plug on the underside of the aluminum plate and place it

out of the way so it is not going to be pinched or cut.

WI XXXX-xxxxxx– 3DP Moving the Printer