3DP Workbench 매뉴얼 - 페이지 6

{카테고리_이름} 3DP Workbench에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DP Workbench 12 페이지. Moving and folding the gantry

3DP Moving and Folding the Gantry

Approved By:

Date: <6/14/2016>

Page 5 of 11

Step 4: Power down and disconnect cables.

Turn off the power and disconnect the unit from the main power source.

With a narrow flat screwdriver disconnect the connectors from the back of the control box.

Disconnect the Bed thermistor plug on the underside of the aluminum plate and place it

out of the way so it is not going to be pinched or cut.

WI XXXX-xxxxxx– 3DP Moving the Printer