AkitikA PAT5RCA Руководство по установке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по установке для Усилитель AkitikA PAT5RCA. AkitikA PAT5RCA 12 страниц. Dynaco pat-5 preamp replacement rca jack
Печатать страницу5. Remove the cover and set it aside in a safe place.
Gaining Access to the Old RCA Jacks
Figure 6-Remove screws to loosen back panel
Figure 7-Remove two screws that fasten back panel to power supply bracket
Removing the jacks may be made much easier by loosening the back-panel. Remove four
screws (refer to Figure 6) and two screws (Figure 7) that fasten the back panel to the
power supply bracket. At that point, you will be able to lift the back panel and tilt it
back. Be careful not to put too much strain on the wires that run from the chassis to the
back panel.
Now remove the sixteen 4-40 screws that hold the jack fields in place. Figure 7 shows 8
of the 16 screws that hold the jack fields in place. All 16 screws must be removed to
allow the jack fields to be removed.
Page 9 of 12