Camille Bauer SINEAX TV 809 Инструкция по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Усилитель Camille Bauer SINEAX TV 809. Camille Bauer SINEAX TV 809 4 страницы. Programmable isolating amplifier
Также для Camille Bauer SINEAX TV 809: Инструкция по эксплуатации (2 страниц)
Печатать страницуMeas. mode/application
Measuring range limits
= Measuring input
= Meas. output
K = Contact output
(option)
= Power supply
8. Configuring the isolating amplifier
A PC, the programming cable PRKAB 600 (for Ex instruments) resp. PRKAB 560
(for non-Ex instruments) plus ancillary cable and the configuration software
TV 800 plus are required to program the isolating amplifier.
The connections between
"PC ↔ PRKAB 600 resp. 560 ↔ SINEAX TV 809" can be seen from Fig. 6. The
power supply must be connected in order to configure the SINEAX TV 809.
The software TV 800 plus is supplied on a CD and runs under Windows 95
or higher.
The menu driven configuration software explains how to configure the TV 809
and the choice of parameters.
The programming cable PRKAB 600 resp. PRKAB 560 adapts the signal
level and provides galvanic isolation between the PC and the SINEAX TV 809
isolating amplifier.
SINEAX TV 809
Programming
connector
Power supply
Fig. 6. Configuring a SINEAX TV 809, Ex version.
1. The programming connector must not be connected
when > 253 V could be applied to the SINEAX TV 809
input circuit.
2. The SINEAX TV 809 programming connector must only
be used with the PRKAB 600 resp 560 and its ancillary
cable.
3. The ancillary cable must first be connected to the
PRKAB 600 resp. 560 before it is connected to the
TV 809 (see arrow).
4. The programming connector is galvanically connected to
the input circuit. Therefore no metal parts of the plug or
socket may be touched.
5. The PRKAB 600 resp. 560 must not be used with other
devices.
6. After programming is complete, the programming con-
nection must be removed from the TV 809.
to PC
Interface
DSUB 9p F
Programming cable PRKAB 600 resp. 560
DC voltage
≤ ± 1.7 V
> ± 1.7 to ≤ ± 100 V
1
2
3
1
4
5
6
4
Ancillary cable
PRKAB 600
Interface
COM
to
SINEAX TV 809
FCC
Ancillary cable
> ± 100 to ± 1000 V
2
3
1
2
3
5
6
4
5
6
7 8
9
10 11 12
K
9. Accessories and spare parts
Description
Programming cable PRKAB 560
(for programming the SINEAX TV 809, non Ex)
DSUB 9p F
Programming cable PRKAB 600
(for programming the SINEAX TV 809, Ex)
DSUB 9p F
Ancillary cable SINEAX type TV 809
Configuration software TV 800plus
for SINEAX TV 809
Windows 95 or higher on CD, in different languages
(Download free of charge under
http://www.camillebauer.com)
In addition, the CD contains all configuration programmes
presently available for Camille Bauer products
Operating Instructions TV 809 Bd in German
Operating Instructions TV 809 Bf in French
Operating Instructions TV 809 Be in English
10. Commissioning
Switch on the measuring input and the power supply.
The power supply unit must be capable of supplying a brief
current surge when switching on. The isolating amplifier
presents a low impedance at the instant of switching which
requires a current I
≥ 160 mA for the version with a power supply range
... I
start
of 24 – 60 V DC, AC
≥ 35 mA for the version with a power supply range of
... I
start
85 – 230 V DC, AC
11. Maintenance
No maintenance is required.
12. Releasing the isolating amplifier
Release the instrument from a top-hat rail as shown in Fig. 7.
Fig. 7
DC current
≤ ± 100 mA
1
2
4
5
Interface
1 meter
Interface
1 meter
1.5 meter
of ...
start
or
≤ ± 1.5 mA
3
6
Order No.
147 779
147 787
143 587
146 557
147 422
147 795
147 802
3