ESI ESRTP4RF Руководство по установке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат ESI ESRTP4RF. ESI ESRTP4RF 20 страниц. Rf programmable room thermostat
Также для ESI ESRTP4RF: Инструкции пользователя (20 страниц)

Печатать страницу

3. Technical settings

Setting TPI, Delayed or Optimum Start

3.1

1. Switch the slider to OFF. Press and keep holding the A

and H buttons together (under the fascia), then press

the Next

Release all buttons.

2. Press the +/– buttons to choose between:-

OFF: The programme will run according to settings

DS (dL StAr DS): When ON, the programmer will run in

Delayed Start mode. The start of the next programme

may be delayed up to 45 minutes depending on the

room temperature

S (OP StAr OS): When ON, the programmer will run in

Optimum Start mode

3. Press the Next

turn OP STOP (Optimum Stop) ON/OFF.

4. Press the Next

+/– to choose between:-

OFF: Working under normal swing value

3 Cycles: ON/OFF one cycle is 20 minutes. This is

recommended for oil boilers

6 Cycles: ON/OFF one cycle is 10 minutes. This is

recommended for gas boilers (default setting)

5. Press the Next

Swing and Calibration settings below.

button to enter the technical settings.

button and press the +/– buttons to

button to enter the TPI settings. Press

button to continue to the Sensitivity/