ACOUSTIC SOLUTIONS 4244051 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Динамики ACOUSTIC SOLUTIONS 4244051. ACOUSTIC SOLUTIONS 4244051 16 страниц. Portable bluetooth speaker

Печатать страницу

1. Troubleshooting

Using your Portable Bluetooth Speaker

Switch on

Press and release the large volume control button on the end of the Bluetooth speaker. The

control will pop out and the blue LED ring around the outside of the volume control will switch

on. The blue LED ring will ﬂash whilst your Bluetooth speaker searches for other Bluetooth

devices. When a Bluetooth connection is made, you will hear an audible alert and the blue

LED ring will change to be steady on.

Switch off

Push in the large volume control on the end of the Bluetooth speaker until you hear a

'click'. Release the volume control and it will remain pushed in and ﬂush with the end of the

Bluetooth speaker. Your speaker is now switched off.

Note: If there is no Bluetooth device connected for a period of 4 minutes, the Bluetooth

speaker will power to 'standby' mode automatically. In standby mode, the large blue LED

ring will ﬂash slowly. Pull in the large volume control, until you hear a 'click', to fully switch off

the Bluetooth speaker.

Adjusting the volume

Turn the volume control clockwise to increase the volume and anticlockwise to decrease the

volume.

Standby

The Bluetooth speaker will automatically put itself into standby mode if there is no Bluetooth

device connected for a period of 4 minutes. In standby mode, the blue LED ring around the

volume control will ﬂash slowly, about every 3 seconds. Switch your Bluetooth speaker off

and on again, it will return to the mode it was last used in (Bluetooth or AUX in).

Charging the battery

Plug the micro USB end of the supplied cable into the micro USB socket on the end of the

Bluetooth speaker. Please make sure that you push the micro USB plug into the socket

fully.

2. Connect the standard USB end of the supplied USB cable to the USB socket on the

supplied mains power plug and then plug into a mains power socket and switch on.

The red charging LED to the right of the micro USB socket on the Bluetooth speaker will

switch on.

Note: You can only charge your Bluetooth speaker using the supplied USB cable and

plug. You cannot charge your Bluetooth speaker using a computer USB socket.