Akiyama CDX-MP200S Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер Akiyama CDX-MP200S. Akiyama CDX-MP200S 16 страниц. Professional cd player

Печатать страницу

1. Specifications

1. Opening and Closing

This operation only works when the power

is on. Press the OPEN/CLOSE button to open or close the disc tray.

OPEN/CLOSE button is provided on the main unit or press PLAY

button, the disc tray automatically closes. If tray is not closed after 60

seconds it will close automatically and pause.

The disc tray cannot be opened during playback to prevent playback

from being interrupted if the OPEN/CLOSE button is pressed

accidentally. Stop playback, then press the OPEN/CLOSE button.

2. Loading discs

Hold the disc by the edges and place it on the disc tray. Do not touch

the single surface (the glossy side).

When using 12cm discs, place the disc in the outer tray guides.

CAUTION:

Do not play foreign objects on the disc tray, and do not place more

than one disc in the disc tray at a time. Doing so may result in

malfunction.

Do not push the disc tray in manually when the power is off, as this

may result in malfunction and damage the player.

3. Selecting Tracks

Select desired track using NUMBER Buttons or press the TRACK

SEARCH Buttons once to move to one higher or lower track or Hold

the TRACK buttons in to change tracks continuously at a higher

speed.

When a new track is selected during playback, playback begins as

soon as the search operation is completed.

4. Starting Playback

Press the PLAY/PAUSE button during the pause or cue to start

playback.

The PLAY indicator lights when playback starts.

5. Stopping Playback

There are two ways to stop playback.1)Press the PLAY/PAUSE

button during playback to pause at that point2) Press the CUE button

during playback to return to the position at which playback

started(Back Cue).

6. Pausing

Press the PLAY/PAUSE button to switch between play and pause.

The PAUSE indicator lights when the pause mode is set.

7. Cueing

"Cueing" is the action of preparing for playback; when the Cue button

is pressed, playback return to the cue point and enters pause mode.

When the PLAY/PAUSE button is pressed during the cue mode,

playback starts.

A. Playback starts from pause (using the jog wheel

Cue point setting:

to set the start point) or skip to a new track during play or pause.

The beginning play point will be set to the cue point.

B. Press the IN/R.CUE button during playback to set the new cue

point ("CUE on the fly").

To return to Cue point press Cue Button. This will return to point A or

B above.

The player has completed the cue or pause operation and is waiting

for the play start command.

When the PLAY/PAUSE button is pressed, playback starts.

C. To memory cues.

8.Auto cue

When disk is loaded, the cue point is set to the first source of music.

If track is changed before pressing play, the cue point is changed to

the new starting point.

If you pause during playback this also sets the new cue point.

9. Frame search

This is done by first pausing then using the jog wheel to set the

starting point (When you use the jog wheel the monitor function

allows you to hear what is playing.) Once you reach your desired

starting point, you can set a cue (starting) point by pressing

PLAY/PAUSE button.

10. Scanning (fast forward/fast reverse)

To turn the search wheel forward or reverse will give you a fast search

through a disc or track. You will scan forward or reverse at 4 different

speeds depending on how much you turn the wheel.

11. Loop play

You can create a seamless loop between two points continuously.

Press PLAY/PAUSE BUTTON so a CD is playing.

The PLAY/PAUSE BUTTON'S LED lights (figure 1).

Press IN/R.CUE BUTTON . This sets the starting point of the

SEAMLESS LOOP. The IN/R.CUE BUTTON LED will light (figure

2).

Press OUT/EXIT BUTTON to set desired ending point of the

SEAMLESS LOOP. You will know you are in SEAMLESS LOOP

mode because IN/R.CUE and OUT/EXIT LED will light and flash.

LOOP INDICATOR in LCD DISPLAY will also flash. Sound will

continue with no interruption (SEAMLESS LOOP)(figure 3).

To exit SEAMLESS LOOP, press OUT/EXIT BUTTON . LED

will stay on but not flash. Music will resume normal play (figure 4).

To replay loop, press the RELOOP BUTTON. IN/ R.CUE and

OUT/EXIT LED and LOOP INDICATOR in LCD DISPLAY will all

begin flashing again (figure 5).

12. SEAMLESS LOOPPLAY (CONT.)

(Must be in SEAMLESS LOOP mode). If a SEAMLESS LOOP

has not been created, follow instructions on this page for creating a

SEAMLESS LOOP. If a SEAMLESS LOOP has already been

created, press RELOOP BUTTON to reenter the SEMALESS LOOP

mode.

Next, press OUT/EXIT BUTTON to return to normal play (figure

6). This disengages the SEAMLESS LOOP mode.

Press OUT/EXIT BUTTON again for new desired ending point of

the loop (figure 7).

press OUT/EXIT BUTTON quickly.

FOR SHORTER LOOP:

Wait until the song plays several frames,

FOR LONGER LOOP:

then press OUT/EXIT BUTTON.

OPERATIONS