Dixon Bayco DBC Series Инструкции по обслуживанию и эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Инструкции по обслуживанию и эксплуатации для Промышленное оборудование Dixon Bayco DBC Series. Dixon Bayco DBC Series 13 страниц. 3" dry disconnects
Печатать страницу8. Press new guide BUTTONS into the outside diameter of the SEAL
CYLINDER and apply a liberal coating of grease to the SEAL
CYLINDER outside diameter.
- If unit uses a PTFE NOSE SEAL, insert that NOSE SEAL
into the end of the SEAL CYLINDER.
9. Insert the BUSHING inside of the SEAL CYLINDER.
10. Place the metal SPRING GUIDE into the SPRING such that the
flange rests on top of the SPRING.
11. Place the assembled SEAL CYLINDER over the SPRING.
12. Center the BLANK ADAPTER on the SEAL CYLINDER and while
holding the CAM ARMS open, press the SEAL CYLINDER into the
BODY using an orbital motion to ease the SEAL CYLINDER
BUTTONS past the O-RING in the BODY.
13. While holding the SEAL CYLINDER securely against the
SPRING force, close the CAM ARMS. You can now release the force
on the BLANK ADAPTER.
14. Insert the POPPET through the opening in the BLANK ADAPTER
and into the SEAL CYLINDER.
15. Make sure the BUSHING is still in the hole in the BODY opposite
of the STUFFING BOX.
16. Insert the YOKE and POPPET STEM assembly through the
threaded end of the BODY and while holding the POPPET thread the
POPPET STEM into the POPPET a few turns.
17. Insert the main SHAFT through the square holes in the YOKE
and into the BUSHING in the BODY. You may need to rotate and
move the POPPET up and down in the BODY and rotate the YOKE
in order to get the end of the main SHAFT installed.
18. If the BODY is stainless steel, apply "Never Seize" to the
STUFFING BOX threads. Install the assembled STUFFING BOX
over the end of the main SHAFT and tighten into the BODY. Take
care not to damage the O-RING in the STUFFING BOX as it slides
onto the main SHAFT.
19. Install the LEVER onto the hex end of the main SHAFT. The
small gap on the main SHAFT hex, points toward the portion of the
LEVER that your hand will grip.
DBC 3" SERIES
DBC 3" Series Dry Disconnects
877.582.3569
7