ClearView RT-RT110 Руководство по установке - Страница 14

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары ClearView RT-RT110. ClearView RT-RT110 20 страниц.

Assembly Instructions

14. Assemble TRIM PLATES. Insert M6 TRIM PLATE SPACERS into holes in raised bottom

portion of MUDFLAP. Attach the ROCK TAMERS TRIM PLATE with the eight M6 TRIM

PLATE BOLTS (Locking STAR PIN™ [STAR PIN™ wrench included]), M6 FLAT WASHERS,

and M6 NYLON INSERT HEX NUTS as shown in Image 10. (20 in-lbs torque [10 mm

socket or wrench]).

Repeat for 2nd MUDFLAP.

Note: DO NOT over-tighten, as it will damage the TRIM PLATE.

Flap Clamp

Bolts (5)

Trim Plate

Bolts (8)

15. The ARMS of the HUB

ASSEMBLY may be loosened

and rotated to fit your vehicle

application. The FLAP SUPPORT

RODS must also be rotated

slightly so the MUDFLAPS hang

vertical.

Refer Image 11.

See Detail D

Square Hole

IMAGE 11

clearviewaccessories.com.au

Detail D

Hub Arm may be rotated to fit

the vehicle application. Upright

position recommended. Rotate

the same both sides.

Arm Pivot Bolts (2)

IMAGE 10