ClearWater Lights Darla Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов ClearWater Lights Darla. ClearWater Lights Darla 12 страниц. Led light kit for bmw k1600gt
Также для ClearWater Lights Darla: Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (16 страниц)

Step 1: Parts List and Bike Preparation

Disassembly

Removal of the seat/seats and left side fairing is required for a clean install.

Disconnect the battery from the bike to prevent damage to the electrical sys-

tem. Follow the photos below as a guide to remove the left side fairing. The

fasteners that need to be removed have been highlighted.

Tips: Fastener 4 denoted in the photo above utilizes a T30 Torx, otherwise

all other OEM fasteners use a T25 Torx wrench. Fasteners 7 & 8 are slightly

longer than all of the others. Fastener 1 is accessible from the inside.

Once these fasteners have been removed, the left side fairing can be

removed by lifting the bottom of the fairing up and out slowly. Be careful, the

turn signal wire is connected to the fairing. Be sure to disconnect the turn

signal wire (circled below) before walking away with the fairing.

Page 6

Page 5