ClearWater Lights Darla Kurulum Kılavuzu - Sayfa 6
Motosiklet Aksesuarları ClearWater Lights Darla için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ClearWater Lights Darla 12 sayfaları. Led light kit for bmw k1600gt
Ayrıca ClearWater Lights Darla için: Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Step 1: Parts List and Bike Preparation
Disassembly
Removal of the seat/seats and left side fairing is required for a clean install.
Disconnect the battery from the bike to prevent damage to the electrical sys-
tem. Follow the photos below as a guide to remove the left side fairing. The
fasteners that need to be removed have been highlighted.
3
6
7
4
8
1
5
2
Tips: Fastener 4 denoted in the photo above utilizes a T30 Torx, otherwise
all other OEM fasteners use a T25 Torx wrench. Fasteners 7 & 8 are slightly
longer than all of the others. Fastener 1 is accessible from the inside.
Once these fasteners have been removed, the left side fairing can be
removed by lifting the bottom of the fairing up and out slowly. Be careful, the
turn signal wire is connected to the fairing. Be sure to disconnect the turn
signal wire (circled below) before walking away with the fairing.
Page 6
Page 5