Arthur Grillo DPC200 Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Контроллер Arthur Grillo DPC200. Arthur Grillo DPC200 7 страниц. Differential pressure controller, low pressure sensor with pi-control-mode
Также для Arthur Grillo DPC200: Руководство по установке и эксплуатации (16 страниц), Руководство по установке и эксплуатации (14 страниц)
Печатать страницу
Mounting
The differential pressure controller DPC 200 is designed for wall mounting.
Installation must be done vertically.
The connection of the pressure lines is performed with plastic tubing, inner diameter ø5 mm and ø6 mm.
Device is position depended, therefore it is important that the assembly is vertical.
Operation
Start up:
- The device must be mounted vertically.
- All connections must be connected in accordance with this manual.
- The supply voltage must be controlled.
Factory setting in the delivered state:
The DPC200 is delivered with the following factory settings:
Operating mode:
Zero point:
End point:
Setpoint 1:
Setpoint 2:
Max. Voltage:
P-parameter:
I-parameter:
k-factor:
controlling mode:
measuring mode
adjusted to measuring range
adjusted to measuring range
about 75% of the measuring range
about 25% of the measuring range
maximum output voltage: 10,0 V
50
3,15
70
normal
4
T1 - Button 1
T2 - Button 2