dji Inspire 1 Краткое руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Квадрокоптеры dji Inspire 1. dji Inspire 1 11 страниц.
Также для dji Inspire 1: Краткое руководство по эксплуатации (10 страниц), Руководство пользователя (20 страниц)
Печатать страницу
7. Mounting the Gimbal and Camera
Remove the Gimbal Cover.
1
Rotate the Gimbal Lock to the unlocked position (to the right when
facing the nose of the aircraft). Insert the gimbal by aligning the
white mark on the gimbal with white mark on the Gimbal Lock.
Rotate the gimbal lock back into the locked position (to the left
when facing the nose of the aircraft).
1
Gimbal Cover
8. Preparing for Flight
Place the aircraft on a flat surface, in an open space, with the back facing you.
Move the Flight Mode Switch to the right to select P mode. ( P mode is Positioning
1
mode, A mode is ATTI mode, and the F mode is Function mode. )
Power on the remote controller.
Power on the aircraft and wait for the self-check to complete. Do not move the
aircraft during the self-check.
Ensure the remote controller is linked to the aircraft before flight. Re-link the remote
controller to the aircraft if it fails to connect. Refer to the INSPIRE 1 User Manual
on how to link.
Ensure the remote controller and your mobile device are connected with a USB
5
cable. Launch the DJI Pilot app when connecting to the aircraft for the first time,
and follow the instructions within the app.
Launch the DJI Pilot app and tap "Camera". Ensure the aircraft is functioning
6
normally by completing the Checklist.Beginner Mode is enabled by default when
you launch the DJI Pilot app for the first time. The aircraft's altitude and flight
distance is restricted when flying in Beginner Mode. We recommend you fly in
Beginner Mode when using the aircraft for the first time. You may disable Beginner
Mode in the settings page of the DJI Pilot app.
Calibrate Compass: tap"MODE"in the app and select "Compass Calibration" to
7
calibrate the compass, then follow on-screen instructions.
Attach propellers with the black nut onto motors with the black dot and spin
8
counter-clockwise to secure. Attach propellers with gray nut onto motors without a
black dot and spin clockwise to secure. Place all propellers onto the correct motor
and tighten by hand to ensure security before flight.
When not in P mode, the Inspire 1 will only maintain altitude, not position, and will
●
drift with wind or user inputs. Return to Home is not available in F mode.
9. Remote Controller Operation
The remote controller is by default set to Mode 2 ( throttle controlled by the left-hand stick ).
Adjust the tilt angle of camera by using the Gimbal Dial.
Left Stick
You can set the remote controller to different modes using the DJI Pilot app.
●
3
Gimbal Lock
Mounting Place
Gimbal Connector
2
Right Stick
Locked
1
3
5
DJI Pilot
App
7
Gimbal Dial
2
4
6
8