djm direct DJMBD13-40 Оригинальное руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Сверло djm direct DJMBD13-40. djm direct DJMBD13-40 19 страниц. Bench drill

Печатать страницу

Recommended speeds for different drill sizes and materials:

Tensioning the V-belts

1. Release the locking screw on the gear cover.

2. Open the gear cover.

3. Release the clamping screw on the motor with an

allen key 6 mm ( not scope of delivery)

4. Slide the motor back to tension the V-belts.

5. The V-belts are correctly tensioned when it gives

way lightly when pressed. Deflection distance of belt is

5-10mm.

6. Tighten the clamping screw on the motor again.

7. Close the gear cover. Fasten the locking screw on

the gear cover with allen key 5mm.

Adjusting the Drilling Bench

1. Release the locking handle.

2. Push the drilling bench to the desired height.

3. Pivot the drilling bench to the desired position.

4. Fasten the drilling bench again with the locking

handle.