Alula RE614 Краткое руководство по эксплуатации
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Дымовая сигнализация Alula RE614. Alula RE614 12 страниц. Smoke alarm connect+ compatible
RE614 Smoke Alarm
smoke alarm.
Features
• Multicriteria Smoke Alarm
• UL217 and ULC-S531 listings
Quick Start Guide
1. Remove the mounting plate.
2. Pull the battery tab.
3. Restore the mounting plate and
twist it fully onto the smoke alarm.
Note: Enrollment is possible only
if the mounting plate is twisted
onto the smoke alarm.
4. Enroll the smoke alarm by placing
the panel into wireless enrollment
mode and then holding down the
smoke's test button until the smoke
alarm beeps.
5. Remove the mounting plate and
refer to Sections 2 and 6 for
positioning and installation.
6. After mounting plate is installed
restore the smoke alarm onto the
mounting plate and fully test the
smoke alarm per Section 7.
Alternate Enrollment Methods
• Scan the smoke alarm's bar code
using the Connect+ Installer app,
OR
• Enter the 8-character serial
number on the interactive service
provider's web portal.
To replace the batteries,
smoke alarm from its mounting plate
and replace the batteries.
This manual should be read prior to use and retained for further information.
Use the Panel's installation guide to verify proper system setup.
RE614 Smoke Alarm
Connect+
is a multicriteria
detach the
Attention
Compatible
™
Pull Battery Tab
12 inches
minimum
Position Smoke Alarm
Test Smoke Alarm
I
12 inches
minimum