Alula RE614 Hızlı Başlangıç Kılavuzu

Duman Alarmı Alula RE614 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Alula RE614 12 sayfaları. Smoke alarm connect+ compatible

Sayfayı Yazdır

RE614 Smoke Alarm

smoke alarm.

Features

• Multicriteria Smoke Alarm

• UL217 and ULC-S531 listings

Quick Start Guide

1. Remove the mounting plate.

2. Pull the battery tab.

3. Restore the mounting plate and

twist it fully onto the smoke alarm.

Note: Enrollment is possible only

if the mounting plate is twisted

onto the smoke alarm.

4. Enroll the smoke alarm by placing

the panel into wireless enrollment

mode and then holding down the

smoke's test button until the smoke

alarm beeps.

5. Remove the mounting plate and

refer to Sections 2 and 6 for

positioning and installation.

6. After mounting plate is installed

restore the smoke alarm onto the

mounting plate and fully test the

smoke alarm per Section 7.

Alternate Enrollment Methods

• Scan the smoke alarm's bar code

using the Connect+ Installer app,

• Enter the 8-character serial

number on the interactive service

provider's web portal.

To replace the batteries,

smoke alarm from its mounting plate

and replace the batteries.

This manual should be read prior to use and retained for further information.

Use the Panel's installation guide to verify proper system setup.

RE614 Smoke Alarm

Connect+

is a multicriteria

detach the

Attention

Compatible

™

Pull Battery Tab

12 inches

minimum

Position Smoke Alarm

Test Smoke Alarm

12 inches

minimum