Cutting Edge 100A MPPT Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Cutting Edge 100A MPPT. Cutting Edge 100A MPPT 8 страниц. Charge controller
Печатать страницу
SCREEN GUIDE:
Settings that are adjusted will be automatically saved, even if power is removed.
From the home screen, short press "menu" to view the status of all parameters.
When you get to a setting you want to change, long press "menu" for 3 seconds to enter "edit mode". After
the setting is adjusted, to save: short press "menu" or just wait for the screen to time out.
b1, b2, b3, b4
Rev 20200515
"Innovative Renewable Energy Solutions"
Home Screen:
Default display which shows the battery voltage, if the solar panels are charging,
and if the load output is engaged.
PV OFF:
The voltage at which solar charging will be disconnected. PV OFF should be the
maximum voltage you want your battery/batteries to be charged. (Typ.
Note: this MUST be modified for LiFePO4 batteries!! Refer to your battery speci-
fications!
LOAD ON (Voltage):
The voltage at which the load output will be engaged (if allowed by time setting).
LOAD OFF:
The voltage at which the load output will be disconnected. This is a protective
setting to prevent the battery from overdischarging.
LOAD ON (Time):
The time at which the load output can be engaged. 24h means the load will al-
ways be on as long as the voltage doesn't drop below "LOAD OFF". 1-15h means
the load output will be engaged for this many hours after the charge controller no
longer detects the solar panel (sunset). 0h activates the "dusk to dawn" setting;
load will be set to engage at dusk and disengage at dawn.
These are preset settings and can be disregarded.
The other displays are status indicators/parameters.
Page 7