dlb AIJGO-61 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы dlb AIJGO-61. dlb AIJGO-61 10 страниц. Resistance meter

User instructions and information

Connect the instrument, cables, electrodes and, if necessary, grounding according

to the measurement method to be used.

Measurement methods

Point-to-point measurement (Rp-p)

Connect the BNC plug ends of the wires to the

instrument and the black shielding wire connectors

to the black sockets of the electrodes and the red

measuring wire connectors to the red sockets of the

electrodes.

Measurement of resistance to ground (Rg)

Connect the BNC plug ends of the wires to the

device and the connector of one of the black

shielding wires to the black socket of one of

the electrodes. To the red socket of the same

electrode, connect the red wire connected to

the black shielding wire already in use. Connect

the other red measuring wire to the ground.

The use of the other black shielding wire is not

necessary for this measurement method.

Surface resistance measurement (Rs)

Connect the BNC plug ends of the wires to the device and the

two red measuring wires to a ring electrode. (Ring electrode is

not provided in the AIJGO-61 product package.) The use of the

two black shielding wires is not necessary for this measurement

method.

Measurement of volume resistance (Rv)

Connect the BNC plug ends of the wires to the device and the

connector of one of the red measuring wires to the red socket of

one of the electrodes. Connect the other red measuring wire to

the conductive material under the measured item. The use of the

black two shielding wires is not necessary for this measurement

method.