Doggy Solutions Pet Patio Potty Инструкция по сборке Руководство - Страница 3

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Средство для ухода за домашними животными Doggy Solutions Pet Patio Potty. Doggy Solutions Pet Patio Potty 8 страниц.
Также для Doggy Solutions Pet Patio Potty: Руководство (5 страниц), Краткое руководство по эксплуатации (6 страниц), Руководство (5 страниц), Инструкции по сборке (4 страниц)

3. Using one of the "Module Attaching Screws",

attach the right side of the Front module to

the right side of the Back module. This screw

is inserted at an angle into the pre-drilled

holes in the modules (Photo 3).

4. In a similar fashion, attach the left side of the

Front module to the left side of the Back

module.

5. Apply caulk from the tube provided to the seam between the Front and Back

modules to prevent any urine from seeping through this seam. Allow caulk to

dry completely before proceeding with Set-Up in next section.

6. During the assembly of the Plexiglas panels described below, do not leave any

of the individual panels unsupported before the side braces are inserted. The

Plexiglas panels can crack if they are left unsupported by the side brace. Also

exercise caution in handling the panels since the edges are sharp. During the

assembly process, each panel should be positioned in such a way so that the

shorter piece of Plexiglas slides inside the box frame and the longer piece of

Plexiglas slides outside the box frame. The top of the frame of each panel

should rest on top of the corresponding side brace.

7. Position the panel labeled "Panel 2" on the left

side of the Left Module.

Doggy Solutions – Pet Patio Potty |

1181 S. Huron Street, Denver Colorado USA 80223

www.doggysolutions.com

| 303.777.7195