Dogtra 280C Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными Dogtra 280C. Dogtra 280C 19 страниц.
Также для Dogtra 280C: Руководство по эксплуатации (14 страниц), Руководство по настройке кодов (2 страниц)

Follow the steps below to charge your system:

1. Open the rubber plugs on the battery charging

receptacles and plug in the charging cable.

2. Plug the charger into a 120-volt wall outlet or, if using

the auto charger, plug into a cigarette lighter only for

lithium polymer batteries (use a 220 volt European

charger for Europe). All indicator lights should glow red

when properly plugged in and the unit will automatically

shut off during the charging process. You will need to

turn the unit on again before use once the unit is fully

charged and unplugged from the battery cable.

3. The lithium polymer battery is fully charged within

2 hours. The lights will stay red during the charging

process and turn green once the unit is fully charged.

4. After charging, cover the battery charging receptacles

with the rubber plugs.

9. Handheld Transmitter LCD

The LCD screen indicates the stimulation level on the

screen ranging from (0-127). The battery life indicator

shows:

3 bars = full charge

2 bars = medium charge

1 bar = needs charge

The battery life indicator only shows the remaining charge

of your transmitter. To find the remaining charge for your

receiver, observe the LED indicator light on the receiver.

Care for LCD Transmitters in Cold Temperature

In cold temperatures (10°F or below), the Liquid Crystal

Display (LCD) on your transmitter may be dim or slow to

respond. Wait until the display becomes visible before

selecting any training level. Even though the LCD screen

might be dim or slow to respond when you press the

buttons, the transmitter will still function properly. In the

occurrence of extremely cold weather, the LCD screen

might take a moment to respond causing the intensity

level to freeze at that current level. If you turn the

Rheostat Dial, the level on the screen may not change

but the actual intensity from the receiver will change