Dogtra 280C Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными Dogtra 280C. Dogtra 280C 19 страниц.
Также для Dogtra 280C: Руководство по эксплуатации (14 страниц), Руководство по настройке кодов (2 страниц)

11. Using the Test Light

1. Turn on the receiver by placing the magnetic red dot

on the back of the transmitter to the red dot on the

receiver. The indicator light will come on for a moment

then blink once every 4 seconds, showing that the

receiver is ready to use (the receiver needs to be

charged if the indicator light is red).

2. Turn the transmitter on by holding down the on/off

button on the right side of the transmitter. The LED will

blink every 4 seconds and the LCD screen will show

the remaining battery life (the transmitter needs to be

charged if there is only 1 bar showing on the battery

icon for the LCD transmitter screen).

3. Place the test light, included in the package contents,

on the contact points as shown in the diagram.

4. Watch the test light as you press the Nick button on

the transmitter. It should light up for just a moment.

The higher the intensity, the brighter the test light will

be.

5. Watch the test light as you press the Constant button

on the transmitter. It should light up as long as the

button is pressed. However, as a safety feature, the

receiver will automatically stop the stimulation if the

Constant button is pressed for 12 seconds or longer.

6. Turn the Rheostat Dial on the transmitter clockwise

and then counterclockwise. The test light should glow

brighter with higher levels of stimulation and dimmer

with lower levels.

Note: The test light may not be visible if the intensity

level is set below level ten.