CYP CSC-1600HD Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаконвертер CYP CSC-1600HD. CYP CSC-1600HD 11 страниц. Video scaler
Печатать страницу
8. Picture Adjustment
The picture adjustments along with other controls of the scaler can be achieved by
using OSD menu control.
9. OSD Menu Operation
The MENU, + , - and enter buttons are used in the on screen menu control operation.
MENU - This button serves two purposes-
to show drop-down menu of main menu page and
adjustment is complete. Press this button while on main menu page will exit
the menu operation.
ENTER - Press the button to confirm your selection of the paramenter you want to adjust.
+
- Press the button to move the highlight bar upwardly from one paramerter to
another. Or when an adjustment paramerter is selected press the button to
increase the setting value.
-
- Press the button to move the highlight bar downwardly from one parameter
to another. When an adjustment parameter is selected press the button to
decrease the setting value.
Note: When a menu or sub-menu pape is selected, but if there is no activity for
about seven seconds, the unit automatically revert to normal mode and the
OSD disappear.
Main Menu- Press the menu button will enter into main menu page shown as follows
Video Adjust
Vertical Freq Adjust
OSD display
Output Terminal
IR sensor
Front Panel Lockout
Use + , - button to choose the parameter you want to adjust.
When a parameter is selected it is hightlighed in red color.
Press ENTER button to enter into the selected adjustment page.
Video Adjust- When video adjust page is selected, it will show picture paramenters
as below:
Brightness
Contrast
Color
Sharpness
Tint
Reset
Use + , - button to choose the paramenter you wish to adjust and
then press enter to get down to value adjust sub-menu.
Use +/- to increase/ decrease the value. use menu to exit afterward.
The adjustment range for each paramenter are as follows :
Brightness
Contrast
Color
Tint
Press reset to return all value back to factory preset position which is the
middle value of each adjust range.
0~255
0~63
0~127
-30~+30
5
to act as " exit " when an