Ashford KIWI 2 SPINNING WHEEL Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты и аксессуары для ткачества Ashford KIWI 2 SPINNING WHEEL. Ashford KIWI 2 SPINNING WHEEL 13 страниц.
Также для Ashford KIWI 2 SPINNING WHEEL: Руководство (13 страниц)

Печатать страницу

Ashford KIWI 2 SPINNING WHEEL Руководство по эксплуатации

Place the maiden bar

onto the dowels in the

main upright and secure

with a 50mm (2") bolt

and barrel

nut.

Insert the end of the flyer

shaft into the rear flyer

bearing and click the

flyer orifice into the front

flyer bearing.

Tie the nylon brake band

to spring

. Thread

the nylon brake band

through the eye and tie

spring

35cm (13 ¾")

from spring

, then cut

the surplus nylon off and

tie it to the other end of

spring

Take the nylon brake

band up and over the

groove in the bobbin and

place spring

onto the

hook. Insert the tension

knob into the maiden

bar, thread the end of

the nylon brake band

through the hole in the

tension knob and tie a

knot. Turn the tension

knob to wind on excess

nylon.

Take care not to

over-stretch the

springs.

35cm (13¾")