Ashford KIWI 2 SPINNING WHEEL Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты и аксессуары для ткачества Ashford KIWI 2 SPINNING WHEEL. Ashford KIWI 2 SPINNING WHEEL 13 страниц.
Также для Ashford KIWI 2 SPINNING WHEEL: Руководство (13 страниц)

Печатать страницу

Ashford KIWI 2 SPINNING WHEEL Руководство по эксплуатации

Then repeat this

sequence for the rear

conrod and the left

treadle board.

Finally click the front

conrod back onto the

crank.

NOTE: It easier to insert the rear

conrod joint into the treadle

board when the treadle board

is at the lowest point - turn the

wheel until the rear conrod is in

the lowest position.

Tap the nylon bearing

down to the bottom of

the hole in the rear flyer

support.

Secure the front and back flyer

supports to the maiden bar with

50mm (2") bolt and barrel nuts.

Check the supports are level

with the edges of

the maiden bar, then

tighten.

Screw the hook and

eye into the maiden

bar.