Ashford KIWI 2 SPINNING WHEEL Petunjuk Manual - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Alat Tenun & Aksesori Ashford KIWI 2 SPINNING WHEEL. Ashford KIWI 2 SPINNING WHEEL 13 halaman.
Juga untuk Ashford KIWI 2 SPINNING WHEEL: Manual (13 halaman)

Halaman Cetak

Ashford KIWI 2 SPINNING WHEEL Petunjuk Manual

Then repeat this

sequence for the rear

conrod and the left

treadle board.

Finally click the front

conrod back onto the

crank.

NOTE: It easier to insert the rear

conrod joint into the treadle

board when the treadle board

is at the lowest point - turn the

wheel until the rear conrod is in

the lowest position.

Tap the nylon bearing

down to the bottom of

the hole in the rear flyer

support.

Secure the front and back flyer

supports to the maiden bar with

50mm (2") bolt and barrel nuts.

Check the supports are level

with the edges of

the maiden bar, then

tighten.

Screw the hook and

eye into the maiden

bar.