Ashford KIWI 2 SPINNING WHEEL 사용 설명서 - 페이지 10

{카테고리_이름} Ashford KIWI 2 SPINNING WHEEL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashford KIWI 2 SPINNING WHEEL 13 페이지.
Ashford KIWI 2 SPINNING WHEEL에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지)

페이지 인쇄

Then repeat this

sequence for the rear

conrod and the left

treadle board.

Finally click the front

conrod back onto the

crank.

NOTE: It easier to insert the rear

conrod joint into the treadle

board when the treadle board

is at the lowest point - turn the

wheel until the rear conrod is in

the lowest position.

Tap the nylon bearing

down to the bottom of

the hole in the rear flyer

support.

Secure the front and back flyer

supports to the maiden bar with

50mm (2") bolt and barrel nuts.

Check the supports are level

with the edges of

the maiden bar, then

tighten.

Screw the hook and

eye into the maiden

bar.