Ashford KIWI 3 SPINNING WHEEL Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты и аксессуары для ткачества Ashford KIWI 3 SPINNING WHEEL. Ashford KIWI 3 SPINNING WHEEL 14 страниц.

Печатать страницу

Ashford KIWI 3 SPINNING WHEEL Руководство по эксплуатации

Slide the inner shell of

the conrod universal

joint onto the front crank

until it clicks into the

groove. Apply a drop of

oil to the inner shell.

Then click the front

conrod onto the

universal joint on the

crank.

Tap the nylon bearing

down to the bottom of

the hole in the rear flyer

support.

Secure the front and back flyer

supports to the maiden bar

with 50mm (2") bolt and barrel

nuts. Check the supports are

level with the edges

of the maiden bar,

then tighten.

Screw the hook and

eye into the maiden

bar.