Ashly FR-16 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пульт дистанционного управления Ashly FR-16. Ashly FR-16 12 страниц. Fr remotes network remote controls
Также для Ashly FR-16: Руководство по эксплуатации (17 страниц), Спецификация продукта (2 страниц)
Operating Manual - FR-8 and FR-16 Remote Level Controller
4.1 Software - FR Control Surface Features
Within the main FR-8 or FR-16 control surface, there are two tabs at the bottom labeled
"Configuration" and "Fader Test". All device targeting and programming of faders happens in the
configuration tab. There are no user controls in the fader test tab, it is meant only for visual refer-
ence, indicating current FR fader and switch position as well as front panel lockout status.
Global Features:
Device Name:
in the device menu tree in the Protea
Target Security:
= "default" with no password), the FR device will have full access to all available control parameters
on the targeted DSP device. However, if an administrator wishes to limit control parameter access from
an FR controller to selected target devices on the network, they must enter the same user name and
password on both the FR-8/16 target security fields and on the specified target's device users section,
under the general security tab. Think of it as creating a login requirement for each device before they
can be assigned to work together, up to the level of parameter access granted by the target device. Note
that even though "Default" and "Admin" are reserved system user names, any changes to these reserved
FR name or password fields requires a corresponding entry on the target device. Note also that target
security is completely independent from the general FR security section described in section 5, and that
user names and passwords implemented there have no impact to or from those used for target security.
Global features affect the entire FR device and include the following:
Up to 20 characters can be used for the device name. The name appears
Software startup screen, as well as the main FR device screen.
ne
When target security is left unspecified or in its default state (user name
5