AMBIC EasiDoser Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сельскохозяйственное оборудование AMBIC EasiDoser. AMBIC EasiDoser 16 страниц.

Печатать страницу
Action
From Display 14
Press  Button once
From Display 15
Press  Button once
From Display 16
Press  Button once
From Display 17
Press  Button once
From Display 18
Press  Button once
From Display 19
Press  Button once
From Display 20
Press  Button once
From Display 21
Press  Button once
From Display 22
Press  Button once
From Display 23
Press  Button once
From Display 24
Press  Button once
Ambic Equipment Ltd – EasiDoser™ Operating Notes
Display
Display Number 15
Pump 2 Mode
Manual Mode ←↑↓→
Display Number 16
Pump 2 Duration
00:15
Display Number 17
Pump 2 Start
Delay = 5s
Display Number 18
Pump 2 Inhibit
00:00
Display Number 19
Pump 2 Speed
= 80%
Display Number 20
Pump 2 Float
N/Open
Display Number 21
Change PIN Code
Display Number 22
Select Language
English
Display Number 23
Calibrate
Pump 1
Display Number 24
Calibrate
Pump 2
Display Number 25
Save
Configuration
Press   buttons until correct pump mode
for Pump 2 is displayed. (Manual, Signal or
Direct)
Press
duration (run time) is displayed. Run time can
←↑↓→
be set from 00:00 seconds to 05:00 minutes.
Default setting: 00:15
Press   buttons until correct pump Start
Delay is displayed. Pump start delay time can
←↑↓→
be set from 1 second to 60 seconds.
Default setting: 5s
Press
duration (run time) is displayed. Pump inhibit
time can be set from:
←↑↓→
00:00 seconds to 30:00 minutes.
Default setting: 00:00
Press   buttons until correct pump Start
Delay is displayed. Pump speed can be set
←↑↓→
from 40% to 100%
Default setting : 80%
Press   buttons until correct Float Switch
is displayed.
←↑↓→
Default setting: N/Open
To change the PIN code used to access
↑
certain MENU items.
0 ↓
(see Changing PIN)
Press button  once to Enter PIN code to
↑
access Select Language screens.
←0→ ↓
(see Changing Language)
To check dispensing volume of Pump 1 press
↑
 button once.
0 ↓
(see Calibration Method)
To check dispensing volume of Pump 2.
↑
(see Calibration Method)
0 ↓
Press  button once.
Displays automatically changes to Display 2.
↑0
-9-
Comment /Action
 buttons until correct pump
 buttons until correct pump
ADE7500 v1.3 (16/03/18)