ambiq micro Apollo4 Blue EVB Краткое руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование ambiq micro Apollo4 Blue EVB. ambiq micro Apollo4 Blue EVB 18 страниц. Evb display kit
Также для ambiq micro Apollo4 Blue EVB: Краткое руководство по эксплуатации (20 страниц)
Печатать страницуApollo4 Display Kit Quick Start Guide
4.
Quick Start
The Apollo4 Display Kit comes with the following items:
▪ Apollo4 Evaluation Board (EVB), revision 3
▪ Apollo4 Display Shield, revision 1
▪ USB Type C cable
▪ Four adhesive-backed rubber feet
▪ Extra jumpers
Caution: The EVB has components loaded on the back of the board. Care should be taken to not damage
these components. The included rubber feet should be applied to the bottom of the board to prevent direct
contact between the components and a desk surface.
The EVB in the Apollo4 Display Kit comes with jumpers pre-configured for default operation. Also, it has
been pre-programmed with the nemagfx_balls_bench example program. To begin EVB program
execution, first carefully attach the Apollo4 Display Shield to the Apollo4 EVB. Press the two boards
together as evenly as possible until the display shield is fully seated on the connectors of the EVB. Then
connect the USB-C cable from a USB port on a PC to the J-Link USB connector (J6) on the EVB, and turn
on the power switch (SW4). The blue LED under the power switch should illuminate. The display should
immediately display balls of various colors and sizes bouncing around the display, blending their colors
where they intersect.
The AmbiqSuite SDK provides many example programs that may be run on the Display Kit. To run these
examples, download the SDK via the link provided above and select any of the pre-built examples in the
SDK at /boards/apollo4b_bga_evb_disp_shld/examples.
QS-A4DK-1p1
Page 9
2023 Ambiq Micro, Inc.
All rights reserved.