AMC XP1000se Manuel - Sayfa 8

Amplifikatör AMC XP1000se için çevrimiçi göz atın veya pdf Manuel indirin. AMC XP1000se 16 sayfaları. Stereo preamplifier

Sayfayı Yazdır

8. PRE OUT 2

When you will like to connect the STEREO
PREAMPLIFIER
more equipments like hooking to more
Power Amps or subwoofers, you can use
the two pre-amp outputs for the purposes.
of
XP1000se
It is very important that there is adequate
ventilation for the whole of the pre-
to
amplifier. Do not place the unit on a rug
or other soft
sink into, obstructing the air inlets on its
underside.
9. AC Selector (115V or 230V)
The AC Selector will be set to the AC
power voltage of your country from
factory. But in case if your
XP1000se is not received directly from
factory or you move from one country to
the other, the AC selector might be
set at different voltage. So, before plug
power cord into your wall AC outlet,
please
always
selector set to the voltage of
the country you will use the
XP1000se or not and set to
correct voltage. When the AC Selector
is set to 115VAC,
the XP1000se can be used in countries
with AC Power Voltage between 110V
and 120V. When the AC Selector is set to
230V, the XP1000se can be used in
countries with AC Power Voltage between
220V and 240V.
10.

AC RECEPTACLE

The AC RECEPTACLE is for you to plug
in with power cord attached in the
packing or you can plug in with other
power cord with your preferences.
6
surface
that
it
check if the Voltage
could