ACR Heat Products The Astwood AW1MF Teknik Kılavuz - Sayfa 9

Soba ACR Heat Products The Astwood AW1MF için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. ACR Heat Products The Astwood AW1MF 13 sayfaları. Multifuel stove

Troubleshooting
Problem
Fire difficult to
Start / Fire goes
Out
Fire burns too
Quickly
Smokes on initial
Lighting
Smokes while
Burning
Low heat output Poor quality wood
Probable Cause
Green wood / wet wood
Logs are too large
Not enough primary air
Insufficient draft
Too much draft
Excessive draft
Flue is cold
Insufficient draught
Action Recommended
Use hardwood logs
with a maximum
moisture content of 20%
Use small logs to start
The fire and once
Established use split logs
Open air control
Check the flue is not
Obstructed
Reduce the air control
Install a draft stabiliser
Burn paper and kindling
to increase heat in flue
Check the flue is not
obstructed
Use seasoned
Hardwood (this has a
Higher calorific value)