Floe V2602 LENGTH BUNKS Montaj Talimatları Kılavuzu - Sayfa 4
Kaldırma Sistemleri Floe V2602 LENGTH BUNKS için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Floe V2602 LENGTH BUNKS 8 sayfaları.
Sayfayı Yazdır
INSERT UPRIGHT TUBES INTO CLAMP WELDMENTS AND ATTACH USING (2) ½" NUTS, HAND TIGHT
ONLY (FIGURE 1.3). ADJUST HEIGHT AND TORQUE TO 70 FT-LBS (FIGURE 1.4).
FIGURE 1.3
2X
FIGURE 1.4
2X
NOTE:
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
UPRIGHTS MAY HAVE TO BE CUT TO
ALLOW FULL TRAVEL OF CRADLE ONCE
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO INSURE THAT YOUR ARE
SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
FINAL PLACEMENT IS ESTABLISHED.
SHEET 4 OF 8