Flomec G Series Ürün Sahipleri Kılavuzu - Sayfa 14

Ölçüm Cihazları Flomec G Series için çevrimiçi göz atın veya pdf Ürün Sahipleri Kılavuzu indirin. Flomec G Series 20 sayfaları. Industrial and chemical models
Ayrıca Flomec G Series için: Kullanıcı El Kitabı (16 sayfalar), Ürün Sahipleri Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Checking the Electronics

Using the frequency oscillator and the cable that is supplied, connect it to the

electronic readout device, the same as you would a turbine flowmeter cable

assembly. Once the frequency oscillator is connected, if no output is displayed on

the electronic readout device, check to ensure that the power is on, the fuses are

good, and the correct K-factor is dialed/programmed into the electronic readout

device. After verification of these items, if there is still no output displayed and/or

registered, then the manufacturer of the electronic readout device should be

consulted.

When

the

frequency

connected and an output is displayed on

the

electronic

indicates that the turbine flowmeter cable

assembly is defective and should be

replaced. If no output is displayed, the

turbine flowmeter cable assembly is good

and the problem lies within the electronic

readout device.

oscillator

readout

device,

this