aero-naut Princess Talimatlar Kılavuzu - Sayfa 6

Oyuncak aero-naut Princess için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. aero-naut Princess 17 sayfaları. 3081/00

Caution: take care to identify the left

and right sides during the next stage.

Chamfer the inside (centreline) edge

of both hull bottom panels 24 (see

arrows), to produce a sharp edge on

the outside of the joint. Lay the two

bottom panels 24 flat on the bench

and tape them together as shown.

Lay the bottom panels 24 on the hull and

tape them to the structure starting from the

rear on the right-hand side, ensuring that the

edges meet accurately along the centre. At

the bow there will be a gap about 6 mm

wide, as the material is too stiff to

accommodate the curvature.

Apply more glue to the joints

between the side panels 23 and the

frames and stringers from the inside

of the hull.

Do not apply glue at this

stage!