AeroAudio MOS - UNO - IP Manuel - Sayfa 4

Stereo sistemi AeroAudio MOS - UNO - IP için çevrimiçi göz atın veya pdf Manuel indirin. AeroAudio MOS - UNO - IP 9 sayfaları.

MOS - UNO - IP

MANUAL

Remote device settings

Device:

Discription:

"" selected

Current setting

SUB-D only

Triggers only on SUB-D GPI

Axia Node

Connects to an Axia node

Axia QOR (16-32)

Connects to an Axia QOR-16 or QOR-32

DHD global logic

Listens to DHD global logics

Axia node:

Connects directly to the remote IP of an Axia node.

Axia QOR (16-32):

Connects directly to the remote IP of an Axia QOR-16 or QOR-32

On using GPI or GPO contacts on the QOR to trigger the MOS-UNO-IP, select Node as device.

On using the Axia livewire software driver the Node needs to be selected as device.

DHD global logics:

Listens to DHD global logics. Enter the DHD Toolbox project ID in the field of TCP command 1.

Enter the used global logic number (1 – 200) in the field of TCP command 2. See GPI settings for

details.

The webpage of the MOS-UNO-IP shows the connection status:

When a connection to a node or QOR has been disconnected the MOS-UNO-IP will try to

reconnect. On a longer connection timeout the webpage will show the link has been disconnected.

To restore the connection the MOS-UNO-IP has to be rebooted.

STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]