BobsCNC E3 Sorun Giderme Kılavuzu
Kontrol Sistemleri BobsCNC E3 için çevrimiçi göz atın veya pdf Sorun Giderme Kılavuzu indirin. BobsCNC E3 16 sayfaları. Cnc router engraver bearing and rail dust kit
Ayrıca BobsCNC E3 için: Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)
Sayfayı Yazdır
- 1. Table of Contents
- 2. My Stepper Motors Are Running Backward
- 3. My Z Axis Is Not Homing Correctly
- 4. My E3 will Not Home Correctly (Diagnosing Home Switches)
- 5. My Firmware Does Not Seem to be Working
- 6. I Tried to Use Easel, Now My Machine Does Not Work Correctly
- 7. I Get and Error When I Run a G-Code File Made with F-Engrave
- 8. My Z Stepper Motor Wobbles Excessively
- 9. My Machine Seems to be Skipping some Commands
- 10. What Are the Alarm Code Descriptions
- 11. How Do I Change My Current Setting on the Stepper Motor Drivers
- 11. Setting the Current on the A4899 Stepper Motor Driver with a Volt Meter
- 11. Setting the Current on the A4899 Stepper Motor Driver Without a Volt Meter
- 12. The Dewalt Motor Shaft Came out During Assembly. (Dewalt Brush Remove and Replace)
Simple Cost Effective Designs.
E3 CNC Router Troubleshooting Guide
The purpose of this document is to give those new to CNC routing is a quick reference for the common
issues of getting the E3 CNC router up and running.
This guide is not complete.
Please check back from time to time. We plan
to continue to add to help you get started.
Contents
My stepper motors are running backward. .................................................................................................. 2
My Z axis is not homing correctly ................................................................................................................. 2
My E3 will not home correctly (diagnosing home switches) ........................................................................ 4
My firmware does not seem to be working .................................................................................................. 5
I tried to use Easel, now my machine does not work correctly. ................................................................... 5
I get and error when I run a g-code file made with F-engrave ..................................................................... 5
My Z stepper motor wobbles excessively ..................................................................................................... 6
My machine seems to be skipping some commands ................................................................................... 6
What are the alarm code descriptions? ........................................................................................................ 7
How do I change my current setting on the stepper motor drivers? ........................................................... 8
Setting the current on the A4899 stepper motor driver with a volt meter. ............................................. 9
Setting the current on the A4899 stepper motor driver without a volt meter. ..................................... 10
The DeWalt motor shaft came out during assembly. ( DeWalt brush remove and replace) ..................... 10