Canon CR-X500 2A Kullanım Kılavuzu - Sayfa 7

Dijital Kamera Canon CR-X500 2A için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Canon CR-X500 2A 25 sayfaları. Remote camera

When carrying the unit, hold the unit by its handle. Be careful not to rotate the housing and

head forcibly.

The dimensions for drilling the holes in the floor are shown below.

If necessary, prepare φ185 to 200 steel spacers to prevent interference between the floor and the cables. Use steel bolts with a

length that enables a screw-in depth of 12 mm or more into the floor, and fix the unit securely to a strong floor surface. Use a level to

check that the floor and the head unit are horizontal.

To also install a washer or microphone, please obtain the mounting jigs (not included).

For more information about optional products, please contact your Canon dealer or your Canon sales representative.

4ｘφ8.6

mounting bolts M8 x 1.25 L=35

Installation

Handle

Spacer (steel)

(If necessary)

185 ~ 200

t1=12mm or more

Cable

Floor surface