Da-Lite TENSIONED CONTOUR ELECTROL Talimat Kitabı - Sayfa 4
Projektör Aksesuarları Da-Lite TENSIONED CONTOUR ELECTROL için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Da-Lite TENSIONED CONTOUR ELECTROL 13 sayfaları. Installer friendly features
Ayrıca Da-Lite TENSIONED CONTOUR ELECTROL için: Talimat Kitabı (9 sayfalar), Montajcı El Kitabı (2 sayfalar), Kullanım Kılavuzu (9 sayfalar), Talimat Kitabı (13 sayfalar)
Sayfayı Yazdır
ELECTRICAL INSTALLATION
1. open the junction box on the left end of the case using a #2
Phillips screwdriver. Install electrical connections that apply
to your unit. Make sure to review the wiring diagram for
proper hook up. Replace the junction box cover.
NoTe: Must be installed in accordance with the
requirements of the Local Building Codes, the Canadian
electrical Code (CeC), CAN/CSA C22.1 and the National
electric Code (NeC), NFPA 70.
2. Test installation by running screen up and down a few times.
Be prepared to stop screen should any objects obstruct the
movement of the screen. To prevent damage to the motor,
the standard duty cycle is 1 minute on and 3 minutes off.
4
Junction
Box Cover
Figure 5