Doorentryonline SR2-X Kullanıcı Kılavuzu - Sayfa 7

Kart Okuyucu Doorentryonline SR2-X için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Doorentryonline SR2-X 12 sayfaları. Proximity, wiegand & mifare card reader with remote control

Sayfayı Yazdır

Connection to a 3

party Wiegand controller or our PC access control system AC8001/2

Set Operation Mode – Stand-alone or

Wiegand (Default is stand-alone)

Programming Step

1. Enter Program Mode

2. Stand-alone Operation

3. Wiegand Reader Operation

4. Exit Program Mode

User data transfer connection (1 x power supply and 9 x SR2-X units)

Set User Data Transfer

Programming Step

1. Enter Program Mode

2. Set Transfer Data on the first SR2-X

For all 1000 users, this will take 3 minutes

3. Exit Program Mode

Remote Control Operation

* (Master Code) #

77 # is factory default for stand-alone

78 #

Remote Control Operation

* (Master Code) #

98 #

Within 3 minutes the green LED will shine, after 1 x bleep

the LED will turn red to confirm data transfer